Gibot123 16 Report post Posted March 8, 2014 does anyone know if you can remove the fixed stat in the housing on a 24v 164 and fit a free fitting stat as the housuing stats are really hard to get hold of . I would have tried but dont have an old one to sacrifice at the mo . Was thinking of using the stat from the earlier 12 v model which is a changable one not fixed in the housing. Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted March 8, 2014 I'm just wondering if a thermostat off of a later 24V V6 as in a 156 one could fit, otherwist remove the thermostat from the body, and fit a racing stat in the line just after its position. Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted March 8, 2014 If you can find one then the Behr pt # is C.539.87 Quote Share this post Link to post Share on other sites
Gibot123 16 Report post Posted March 9, 2014 thanks smaky. the only issue i have is that on the 164 the only bleed plug is actually on the stat housing where as the 156 v6 has a bleed on the pipe behind the rear cyl head the 164 doesnt. I will check out the racing stat though. :im Not Worthy: Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted March 9, 2014 (edited) thanks smaky. the only issue i have is that on the 164 the only bleed plug is actually on the stat housing where as the 156 v6 has a bleed on the pipe behind the rear cyl head the 164 doesnt. But there is nothing to stop you loosening the highest pipe to bleed it like we used to in the olden days. Edited March 9, 2014 by Smaky Quote Share this post Link to post Share on other sites
Gibot123 16 Report post Posted March 9, 2014 yes silly me should know better you're quite right .Cheers Quote Share this post Link to post Share on other sites
Gibot123 16 Report post Posted March 17, 2014 (edited) Having now got the stat off the car it is possible to clamp the stat and remove I therefore think it should be possible to use the housing and replace the stat itself with one from the later type as they appear to be fitted in the same way just the housing is slightly different in design. Good news Me thinks. Will let you know how it goes when I get the new stat. Edited March 17, 2014 by Gibot123 Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted March 17, 2014 Yes that is what I was getting at. Quote Share this post Link to post Share on other sites
Gibot123 16 Report post Posted March 20, 2014 found a stat insert from a 164 2.0 but the sealing ring is a bit too large but as this is only £7.50 not £40 got to be worth a fiddle to see what happens. Quote Share this post Link to post Share on other sites