Cas 2 Report post Posted February 20, 2015 Selespeed won't select forward gears. Does reverse no problem but no click when you select forward? Pump works when you open the door. Is this a solenoid failed? How many solenoids for forward ? Or an actuator failure Anyone been down this path. Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted February 20, 2015 It's not refusing to select forward gears, it's just stuck in reverse, chances are that the pump has failed or sele fluid is low, either way the cause will need to be found. Quote Share this post Link to post Share on other sites
Cas 2 Report post Posted February 21, 2015 Selects neutral and tries to select forward. Pump works when you open the door . Little click when you try to select 1st ,forwrd . Quote Share this post Link to post Share on other sites
Cas 2 Report post Posted February 21, 2015 Loose/poor connection by the battery, big connector. Might help someone in the future. Many thanks for those who posted. Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted February 21, 2015 So a battery terminal was loose? Quote Share this post Link to post Share on other sites
Cas 2 Report post Posted February 22, 2015 No, it was the big wiring connector on the side of the battery , below the air-flow. Quote Share this post Link to post Share on other sites