AFLA 4 Report post Posted February 13, 2012 Hi all, My driver side wing mirror is loose so much it can swivel forward. I found I can take it off, leaving it dangling on the wire loom. I looked inside and saw the spring loaded washer that connects to the top of the pivot stub is, well,... Not connected to the stub, hence the loose fitting. Anybody know how i can dismantle and reconnect the top washer/stopper to the top of the stub and reload the spring? Seems like it cannot be done without complete dismantling. Any help would be appreciated. I don't want to just go and buy a used mirror if I can fix it. Tuval Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted February 15, 2012 I shall dig out amirror I have stripped down so you can see. Quote Share this post Link to post Share on other sites
finny05 1 Report post Posted February 27, 2012 I have one stripped down at work Alex,next time your over ask me. I will dig it out. Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted February 27, 2012 I have one stripped down at work Alex,next time your over ask me. I will dig it out. It's OK, I've found them, now where's the damn camera??? Quote Share this post Link to post Share on other sites