alfaholic 001 0 Report post Posted July 16, 2011 Hi guys I'm busy with my 2.0 twinspark (32301) Does anybody have the specs for the bolts, head bolt torque, big end torque, camshaft caps torque,etc...? Thanks... Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted July 16, 2011 Head bolts - 20Nm, 40Nm, 90 deg, 90 deg, 90 deg. All done in set sequence. Cam shaft caps - 13Nm (wet) Main bearin caps - 96 Nm (wet) Flywheel bolts - 121 Nm Conrod caps - 25Nm, 60 deg (wet) (1.4 ONLY 50 deg) Crank pulley bolt - 340Nm (left hand thread) Timing cover screws - 6 Nm Sump - m6 - 7 Nm m8 - 21Nm Sump plug 17Nm Exhaust cam pulley - 100Nm Inlet cam pulley - 18Nm Quote Share this post Link to post Share on other sites