Search the Community

Hi, I am the owner of an alfa 156 selespeed model year 2001. I am the firts and only owner of my car. To make the history short, 2 years after I bought my car the problem with selespeed strated. in the morning specially the cold days the clutch started with slipping when I drove the car. but the slipping stoped (happened only between gear change) after a while (3 or 4 gear change). If I waited 3 or 4 min after I started the car the clutch did not slipp. my car has done only 110000 km. until 2 mounths back it just got worse and worse. I have shown it to acthorized Alfa garage , but they didnt find any issue from the car computer. however they did recognized the same skiding problems when the car i cold. The last month the car has act like a wild horse. it jumps when I push the acceleration pedal. Sometimes the display shows gear 4 when I drive the car from stop posion, but it was actually in the 1st gear and when I changed up, the gear came to 5th and it even shows that it is in 5th gear. Display usually was flashing when the car was in 1st and 2nd gear. And last but nor least when the car start drive from stop posion, quite often the gear jumps from 1st to 3rd gear and make the driving impossible. I have to push the accelaration pedal faster to not get in to that problem. But as you understand you can not make a flying start in many situation. So decided to change the clutch. And It showed up that the clutch was finnished. so it was the correct desition however 110000 km is a very low distance to change the clutch. my friend has a car repair shop. he changed the clutch. the problem with slippinging is gone but all other problems are still remaining. Do you know what is the problem and how I can repair it? I have purchased the multiecuscan from multiecuscan.net. and executed som of adjustment tests but it does not help. I have read about the 28mm adjustment but in the multiecuscan I did not find any measurement showing this. Many thanks Strawberg