Search the Community
Showing results for tags 'gear'.
Found 1 result
-
Hi I have read through the posts and cant determine what may be the cause of my issues so hope that someone can help with the diagnosis. Had some issues several years ago with the first turning out to be the "rotor sensor" and later with an inability to select gears which was remedied by replacing the brushes in the pump. 12 months ago I imported an accumulator and relay which I got the local mechanic to fit while replacing the cam belt. At the time I asked regarding the loud clunky/graunchy noise when changing between 2-3, 3-4 and 4- and 3-2 which he advised was the gearbox that needed replacing but might be ok for another 20,000kms or so. So I haven't had that done as yet. Car drove great for about 5 months then the following symptoms started appearing: When the car has travelled about 20kms it is warm enough for the issues Stopping and turning the engine off, then when trying to restart the car the gears flash through on the dash display5,4,3,2,1,N (flashing on N) so unable to restart. I make gear selection in each direction until N appears and I quickly restart the car before it flashes or moves to a different gear on the display. Moving off from a stop position can cause bunny hops and or "wheelies" Selecting R, quite a considerable pause and then a car shuddering clunk. A considerable delay when changing gears The pump runs upon opening the door and again when inserting the key prior to selecting N for start Apologies for the non-technical speak as I am not very mechanical but trying my best to understand as over the 5 years I have had my car I have found that it really helps to have a pretty good idea what may be the cause before engaging the services of the auto-electrician or mechanic. Many thanks