Jump to content

el@d147

Members
 View Profile  See their activity

  • Content Count

    4

  • Donations

    0.00 GBP 

  • Joined

  • Last visited

Posts posted by el@d147

  2. Posted · Edited by el@d147 · Report reply

    I'll start with the fact that i replaced the brakes booster unit (include the pump). 

     

    Before that everything was just fine!

     

    Now i have 2 problems:

     

    1. In city mode the gears doesnt change, for example if i start from 1st gear the rpm goes up but the gear stay on 1st. Same problems with all gears if i go from any gear on manual to city, Gear stay on the last 1 before i changed to city mode from manual. 

     

    2. In manual mode gears changes are ok except selespeed fail beeps and the kangaroo jumps problem. I have really bad kangaroo jumps from standing state on 1st gear (low rpm) until i rev up and change to 2nd gear. it feels like there is not enough fuel in the system. my guess its a sensor problem but its not a real direction to the solution. 

     

    Btw, road clutch set to 28.1mm. 

     

    I tried to do EOL calibration but i have problem almost 3 years with it. It failed and say: "Error due to absence of suitable conditions" 

     

    Thanks for any help here

  3. Posted · Edited by el@d147
    Spelling correct     · Report reply

    I'll start with the fact that i replaced the brakes booster unit (include the pump). 

    Before that everything was just fine!

    Now i have 2 problems:

    1. In city mode the gears doesnt change, for example if i start from 1st gear the rpm goes up but the gear stay on 1st. Same problems with all gears if i go from any gear on manual to city, Gear stay on the last 1 before i changed to city mode from manual. 

    2. In manual mode gears changes are ok except the kangaroo jump problem. I have really bad kangaroo jumps from standing state on 1st gear (low rpm) until i rev up and change to 2nd gear. it feels like there is not enough fuel in the system. my guess its a sensor problem but its not a real direction to the solution. 

    Btw, road clutch set to 28.1mm. 

    I tried to do EOL calibration but i have problem almost 3 years with it. It failed and say: "Error due to absence of suitable conditions" 

    Thanks for any help here! 

  4. Posted · Edited by el@d147 · Report reply

    Hi guys,

    I have this error and cant solve it ,

    tried to clean contacts and replace on/off passenger airbag switch with used 2nd hand

    and after reset it was clean for 1 week and then the airbag light showed up again

     

    1st the yellow light showing up

    and then the red is join her/

     

    i wish someone can help me with this one,

     

    Elad.

     

    btw, cant upload the picture so i added this link

    ill be glad if someone can uplaod it correctly

     

    https://files.fm/u/4d3znp3c

×
×
  • Create New...