sal12349956
Members-
Content Count
14 -
Donations
0.00 GBP -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by sal12349956
-
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Thanks. I'm not sure if it's something I've done but the car is working fine now. I didn't test the connections or anything but if it's running fine I'm happy and not touching anything. Thanks for your help! ! -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Any idea where the 2 ecu's are located in the grande punto? I'll look to start testing connections next. Will a multimeter suffice to check these? Thanks -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
So they do move when I press the pedal very gently when it's working normally. But when it's acting up, even pressing it gently triggers it and the throttle % in MES doesn't move... BUT even when the numbers in the MES aren't moving, the engine does Rev up normally. What can I do next?? Thanks -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Where is the throttle pedal sensor located? How do i test the throttle body? Thanks! -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
So I got the same fault again and noticed that if I press the accelerator abruptly I can trigger the fault. I hooked up the MLS with the key in 'on' position (so engine not started). MES hooked up, I pressed the accelerator a couple of times quickly and triggered the fault. IS there a sensor that could be faulty near the accelerator? Or wiring near the accelerator that could be loose? At least now I know what triggers it... Waiting for your advice .. Thanks -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Yes you're right. It's a punto. I'll look under the battery tray next Will report back. -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Hi Smaky, So I tried to find the multi plug but not sure what you were referring to. I've pasted a link here to pics. I think the fiat configuration may be different from alfa's setup. Could you please tell me what plug you were referring to. Thanks http://i909.photobucket.com/albums/ac295/sal12349956/20150905_182834_zpswhofjuzh.jpg -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Hi Smaky, Tested the battery using multimeter. 12.6V that went up to 14V when reved. couldn't test the amps. But I think it's ok. I don't know to much about testing the wires so would appreciate if you could let me know how I could go about testing those. Which ones to test etc. Thanks -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
I've left the car unused for weeks and it starts up first time si the battery might still be ok. I'll check it anyways. If it's the wiring, what wiring shouldi check? Thanks. -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Hi Smaky, i've finally managed to hook up the car to MultiECUScan and get the error codes below. Note that i cleared the errors and didn't get the codes even though the dashboard display was showing a fault (check engine light on). P1770 Accelerator pedal signal - intermittent fault P1819 engine torque (from CAN) - intermittent fault P0856 VDC messages (from CAN) - intermittent fault P1742 selection sensor - Open circuit/short circuit at +V batt - intermittent fault look forward to your reply... thanks for your help. -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
That would be greatly appreciated. I'm in the S. Can come to the SW. Would it be possible to email me a time that works for you. My email is [email protected] Appreciate all your help! -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
Thanks Smacky. I've topped up the reservoir to just below max level using tutela selespeed oil. Not sure how to proceed from here then. Any advice? It doesn't have any other issues I.e. It can select all gears and the pump sounds/looks like it's working fine too and the car is drivable on occasion. I'm afraidi don't want to tinker with the wrong thing and have what works also fail on me. Any advice on how to proceed will be much appreciated. -
Selespeed Advice Needed
sal12349956 replied to sal12349956's topic in Selespeed/Automatic Gearbox Help
The leaking part I'm told is the gear selection sensor. Is it something that's easily replaceable? The part number printed on the part is Pf7c/00 1709AA -
Hi All... First time posting here. I've been having troubles with the selespeed gearbox. Shows gear not found message whilst driving. I've topped up the selespeed oil and that got rid of the warning but i noticed that it's leaking quite significantly. I've got a pic of the part i think is causing the leak. if possible can i share it with one of the experts here and see if/how i can replace it or if there is another problem... Any advice/help would be much appreciated. Thanks