Alfa_owner
-
Content Count
209 -
Donations
0.00 GBP -
Joined
-
Last visited
Posts posted by Alfa_owner
-
-
-
Why cant we just use the logo above? and have that printer for window stickers?
I'd be happy to chase some places up?
-
Quote of the year goes to....
You sticker bomb an Alfa and your dead to me! plus you'll get banned from here too.
-
It almost seems a shame to fit that manifold!
Good work, i'll read through more thoroughly later on as i'm after fitting the 20vt into my 145. Will see if i can pick up any hints/tips from here
You'll notice that's why it's on a radiator cover in full view
-
2 years in the making.. haha!
I have a feeling i'll be in for a wait
-
Oh dear.. what have i done *hangs head in shame*
-
Ello,
Is this something which is in the pipeline?
Matt
-
-
Decided i would paint the inlet black and have the plenum polished along with the turbo housing and water rail.
The parts have been shipped off to one of our local fiat coupe guys who does it for a bit of money on the side
Managed to find a stainless steel manifold and proceeded to give it a good polish and buff
-
Not being put off i decided i would start with some of the other parts and things would come together.
so i started with the polishing...
Coil pack cover
Dumpvalve and short pipe - i have polished the end dump valve cover but that is not seen in the picture. I didn't want to go nuts on the polishing of parts!
Ground down the casting marks on the turbo housing.
It was then time to start looking at inlets so bought a already ported inlet and plenum.with 365cc injectors
-
Then in true - not knowing what to do next we loaded the engine onto the van!
Once at the other end we proceeded to remove the old 1.6 twin spark engine.
I'm afraid at this point the pictures got a bit thin as we were busy, covered in oil and getting tired.
Looking very sad - this is how its looked for a little while...
Then decided perhaps it was time to start up again - so i gave the gearbox a paint best i could.
but have then realised the gearbox is too long and as such i now need to find the shorter revision gearbox.
-
so first things first lets whip off the exhaust!
Then thought we would tackle the bonnet which seemed to only have been held on by 2 bolts and not 4 as expected.
It litterly...
fell off....
We were on a tight time frame as it was a borrowed garage... so we really cracked on.
Boost gauge stuff out...
Old man doing his thing!
and out....
Car rides a bit high now!
-
Dirty!!
Genuine HKS dumpvalve and modified pipe
Genuine K&N filter which needs a clean!
-
this got me thinking!!!
Easy power.... easily tunable... and will leave a GTA and R32 etc for standing...
With a factory fitted LSD and using the same ECU setup as a lancia intergrale they are really capable.
one thing led to another..... ;D
Currently has the following mods;
Blue flame Exhaust
3" down pipe to turbo
Motech Chip
Gizzmo MS-IBC Boost Controller
HKS dump valve with hard pipe
Stage 2 gt28rs Turbo - 360 bearings + 60 trim wheel
Straight induction pipe
paddle clutch
Before a few of the modifications it ran 260 on the rollers and on opinion of the tuner should be running 310 easily
-
Exterior wise... it looks completely standard...
Had a set of road pads and vented, grooved and drilled discs.
and its only modification engine wise...
A gsr induction kit... on a very underpowered 1.6 engine.:'(
so.. that was my next venture!!
i looked into the different engine types available to me... 1.8... 2.0l.. 3.2 v6 from the gta. I was disappointed by all 3.
I paid a deposit to have a race engine made based on the 2.0l engine but then withdrew having spoken to a gentlemen in Poland...
who fitted.....
A 220bhp Fiat Coupe engine....
-
This was then changed for a black leather and red stitch interior
Then added matching gearstick and handbrake gators.... and also a stainless steel round gear sweetheart.
The rear tweeter covers were changed to the bose editions, the dash clocks were changed to the white facelift versions and the front tweeter covers were changed for the later facelift version which included a chrome ring
-
Software!
First off i needed to make the loading screen - so a modified bios screen...
Then started looking into lots of different routes for the operating system. For this i used windows 7 lite by Experience (google it)
and then cut some more bits outs.
Then checking the changes as i go along...
i then managed a 10 second from cold boot.
Thats fast!!
This was then wrapped in brushed steel effect vinyl as well as the heater controls as well... pictures to be taken though!
Interior - it previously had a cream and grey cloth interior... god awful!
So stripped it out....
-
Moving on -
Steering Wheel - As part of my attempts to make it look Oem i wanted the steering wheel buttons to work as well... so i purchased a new steering wheel... to replace the previous non buttoned version.
To help me achieve my idea i spoke to a couple of companies and one of them sponsored me!
Such a small little device which plugs in via mini usb.
It works on button resistance... these resistances are then mapped to keys on the keyboard! Clever Huh!?
In testing....
Fitted!
-
Dismantle the car....
Test fit...
Still no where near perfect.. and at this point i was struggling to get it perfect so i had few options...... attack it in the car!!!
testing the hdmi connection into the screen with a skybox....
- she's lovely isn't she? -
Screen -
Decided that a 7" touchscreen might fit in place... so bought the screen and a double din adapter...
Decided at this point i didn't like the step on the buttons.. so chopped it out.. re moulded it.. and highlighted all the imperfections before taking it to the car.
-
the main component being the motherboard. I opted for a Pico Itx M10000 - The EPIA PX 10000 is the first motherboard from VIA Technologies to be released in their 10cm x 7.2cm 'Pico-ITX' form factor, and is currently the 'world's smallest full-featured x86 mainboard designed for ultra compact embedded PCs, systems and appliances'.
I then coupled this with a solid state hard drive.....
Needing to find somewhere to mount the hard drive.. we started designing again....
;D
cutting the amp casing to fit... bootiful!! -
The car was then taken to Hadden Hill (we've always taken our cars there) to be serviced and have the cam belt changed.
A total of 478 pound was spent but it later transpired that they hadn't changed the variator or the waterpump. For those that don't know the variator sits on the end of one of the cam and as it starts to wear a petrol engine starts to sound just like a diesel!
Obviously unhappy i walked away not wanting to spend any more money on an engine which would most likely be just fine!
March came and it was due its MOT... it needed 2 tires but i was reluctant to buy new tires because i had my eye on some slightly bigger wheels so i was in the market for some used tires! 20m from Philips tires in Oxford the water pump gave way.
I was recovered back to hadden hill after sitting in the water eaton bus car park for almost 4 hours.
More money was spent and a week later the Alfa drove out. Slightly worried the car didn't seem to have as much power as previous... so the car was returned for them to have a play.
It transpired that they didn't have the proper cam locks and so i can only guess how they timed it up. Not good.
They refunded a big wedge of the money and as our family used them a lot they made right and all was remedied.
Time went on and i suddenly found myself with the modding bug again... this time looking at the stereo.
A set of focal 165KR component speakers, £200 in Dynamat and 2 days had the basics in. It wasn't really perfect and i was a little disappointed in the features achievable by the factory headunit.. so i fitted an aftermarket one but inevitably wanted satnav etc.
I looked at buying an official Alfa Romeo sat nav unit... £1200.
I decided to make my own. With a strong background in IT (IT Manager) i set about choosing components and also looking at amp designs.
Bought 2 Alpine amps... a 4 channel and a mono block
but these were quickly sold as i just didn't like the warmth of the sound. I needed to focus on the end result and for me this could only be achieved by a computer.
Some ideas and sketches started to be made and i had a few ideas.
Eventually i went the route of buying Genesis Amps (i dont have any pictures
)
A four channel amp - which could be used to run a 2 way front end (so tweeters and mids)
2 channel amp - would be used to run rear speakers for back fill
and another 2 channel amp which would be used to run the sub.
It was at this point i managed to acquire a piece of the aluminium extrude which is used to build these amps.
[imgpop]http://farm7.staticf..._b10bcf54cb.jpg[/imgpop]
Not being very big... i scratched my head for weeks trying to work out which components would fit for a car computer.
So i decided on a Pico Itx setup.
-
My story starts in 2010 when on Christmas day i smashed my Seat Leon :'( Having argued with some ice she ended up rear ending the barrier going onto the M4
Just after Christmas we attempted to repair the work but a snapped wishbone arm and the extent of the body damage just wasn't cost effective and i wrote the car off.
This then meant i needed another car so i looked to the usual suspects to find a decent car. I had a budget of £2000 which wouldn't go along way. I looked mainly at Audi A3's and S3's but found none in a decent condition for my price range.
??? Bummed out and needing a car for work i started searching locally for 'cheap' cars... my dad and ex girlfriend were great at this point having searched high and low for what seemed an impossible ask... we had a couple of options;
Alfa Romeo 147, Couple of mk4 golfs and obviously Saxo's and Corsas.
Went to look at the Alfa first and immediately fell in love.
Having been owned by a middle aged couple - motorbike owners. it looked well looked after. 2 owners. They had bought it for their son whom kept dropping his bike but he couldn't get used to driving it.. so it had to go.
-
Hello guys... couldn't seem to find the project area so thought i would put this here!!
My story starts in 2010 when on Christmas day i smashed my Seat Leon :'( Having argued with some ice she ended up rear ending the barrier going onto the M4
Just after christmas we attempted to repair the work but a snapped wishbone arm and the extent of the body damage just wasnt cost effective and i wrote the car off.
This then meant i needed another car so i looked to the usual suspects to find a decent car. I had a budget of £2000 which wouldn't go along way. I looked mainly at Audi A3's and S3's but found none in a decent condition for my price range.
??? Bummed out and needing a car for work i started searching locally for 'cheap' cars... my dad and ex girlfriend were great at this point having searched high and low for what seemed an impossible ask... we had a couple of options;
Alfa Romeo 147, Couple of mk4 golfs and obviously saxo's and corsas.
Went to look at the Alfa first and immedietly fell in love.
Having been owned by a middle aged couple - motorbike owners. it looked well looked after. 2 owners. They had bought it for their son whom kept dropping his bike but he couldn't get used to driving it.. so it had to go.
Can We Have Some Stickers?
in The House of Commons
Posted · Report reply
Whenever you're ready smiffy!
Im hoping once i've detailed my car tomorrow i can get one to brighten it up a little