Jump to content

alfadog

Members
 View Profile  See their activity

  • Content Count

    3

  • Donations

    0.00 GBP 

  • Joined

  • Last visited

Posts posted by alfadog

  2. Posted · Report reply

    Hi,

     

    That helped me allot.

     

    Is there any advise you can give me to remove the pipes from the actuator:

     

    Would I need any special tools ? and also is there any part of the engine that I would have to remove in order to get the pipes wiggled out the tray section ?

     

    And one last thing did you have to bleed the system and if so how did you do it ?

     

    I very much appreciate your advice and thanks in advance for my next question.

     

    Mark

  3. Posted · Report reply

    Hi there,

     

    I have had my Alfa for about 8 months now and its time for the brushes to be replaced,that being said I have gone ahead and removed the reservoir for the pump and the bracket holding the sele in place.

     

    My problem is that I am stuck due to a bolt that wont come lose and im scared of damaging other components in the pump. I have tried loosening the bolt with no effect so I wondered if it could be threaded the opposite way.

     

    Basically I'm looking for advice on how to remove this bolt ( Outlet pipe to selespeed pump with bolt holding it into place.

     

    http://www.google.co.uk/imgres?q=selesp ... =123&ty=73

     

    If you have a look at the link it shows you number 4 (Inlet Pipe) and it is the pipe exactly next to it, the one going to the actual actuator.

     

    Hope I have explained my situation and that someone could give me some advise on the matter which would be greatly appreciated.

     

    Thanks

×
×
  • Create New...