LucaGTA
-
Content Count
3 -
Donations
0.00 GBP -
Joined
-
Last visited
Posts posted by LucaGTA
-
-
Hi, I'm the owner of the GTA in question. I wanted to say, as not said by my friend peter2, that the sensors in question have already been replaced 2 times in about 2 years, the last few months ago. Without solving the problem that recurs every 2-3000 km. And that just disappears for other 2-3000 km simply unplugging and plugging the connectors and/or moving its wires connected to them. So I've got the new connectors and time permitting will make them replace by lengthen the cables.. I think this maybe the solutions of this problem. What do u think about ?
Tnx !
-
Hello, I'm Luca from Italy, near Venice. Owner of a 147 GTA SS with various changes of trim and engine. I joined mainly to receive and give help with the problems of the Selespeed gearbox. Unfortunately I learned many things the hard way, and now my works reasonably well, albeit with some slight little problem a couple of times a year
Gta Dropping To N
in Selespeed/Automatic Gearbox Help
Posted · Edited by LucaGTA · Report reply
Hello , I have changed about 3 batteries in 8 years that I own the GTA . The last has less than a year old and is a Varta AGM also increased from the original. Exclude electrical problems arising from it , I checked the voltages and are in place . I own an official Fiat Examiner Smart for years and I did all the tests and reset possible , but precisely the problem seems to disappear only by disconnecting and reconnecting the connectors of the sensors which , I repeat , appear with their wiring very short . Giving to think that with vibration and engine heat , loosening and do not make good contact , hence the relative error after a certain number of kilometers .
EDIT:
I also add that with Examiner connected I tried to move , either disconnect the connectors of the two sensors in question and I appeared exactly the same error code of me when the problem arises . I am relatively sure that the problem is in the connectors and / or in the relative short / ruined cables. However it is not an easy job for lack of space to replace them , also because it 's not easy to find the connectors that I found with difficulty..