Jump to content

strawberg

Members
 View Profile  See their activity

  • Content Count

    11

  • Donations

    0.00 GBP 

  • Joined

  • Last visited

Posts posted by strawberg

  3. Posted · Report reply

    Hi,

     

    I did calibrate the "Clutch Engage Position (Self Adjusted)" to 28,015. this is teh value when the engine is not running, when I start the engine and put the the 1st gear in the posion for "Clutch Engage Position (Self Adjusted)" goes to 27,7. is this correct.

     

    the original value for the "Clutch Engage Position (Self Adjusted)" before adjustment was 27,3 with stopped engine. and now this value as mentioned is 28,015.

    what I can see, the driving comfort was better before. do I have the correct values after adjustment?

     

    Thanks

  10. Posted · Report reply

    do you use the latest version of the muliecuscan from fiatecuscan.net? we may have different interface.

    I chosse the "156 '02 selespeed" and system: "Gearbox" with "control Module" "Bosch Motronic Me7.3.1 EOBD Injection"

    then I have the following tabs:

    "Info" "Errors" "Parameters" "Graph" "Actuators" "Adjustmetns"

     

    So which tab do you mean I need to enter to identify the "clutch engage position"?

     

    Thanks

  11. Posted · Report reply

    Hi,

    I am the owner of an alfa 156 selespeed model year 2001. I am the firts and only owner of my car.

     

    To make the history short, 2 years after I bought my car the problem with selespeed strated. in the morning specially the cold days the clutch started with slipping when I drove the car. but the slipping stoped (happened only between gear change) after a while (3 or 4 gear change).

    If I waited 3 or 4 min after I started the car the clutch did not slipp.

    my car has done only 110000 km. until 2 mounths back it just got worse and worse. I have shown it to acthorized Alfa garage

    , but they didnt find any issue from the car computer. however they did recognized the same skiding problems when the car i cold.

    The last month the car has act like a wild horse. it jumps when I push the acceleration pedal. Sometimes the display shows gear 4 when

    I drive the car from stop posion, but it was actually in the 1st gear and when I changed up, the gear came to 5th and it even shows that it is in 5th gear.

     

    Display usually was flashing when the car was in 1st and 2nd gear. And last but nor least when the car start drive from

    stop posion, quite often the gear jumps from 1st to 3rd gear and make the driving impossible. I have to push the accelaration pedal faster to not get in to that

    problem. But as you understand you can not make a flying start in many situation. So decided to change the clutch. And It showed up that the clutch was finnished.

    so it was the correct desition however 110000 km is a very low distance to change the clutch.

    my friend has a car repair shop. he changed the clutch. the problem with slippinging is gone but all other problems are still remaining.

    Do you know what is the problem and how I can repair it?

    I have purchased the multiecuscan from multiecuscan.net. and executed som of adjustment tests but it does not help.

    I have read about the 28mm adjustment but in the multiecuscan I did not find any measurement showing this.

     

    Many thanks

     

    Strawberg

×
×
  • Create New...