kevinbruce 1 Report post Posted July 28, 2016 Hi everyone thanks in advance for any help I was driving my 2003 alfa romeo 156 jts selespeed and it just stopped while i was doing about 80kmh now it wont crank properly or actually start also with the key on engine not running (obviously) i can change between neutral firt second and reverse but wont go past second 1 Quote Share this post Link to post Share on other sites
rob3rto 7 Report post Posted August 2, 2016 crank sensor maybe Does it start after you leave it for 30mins to cool down? Is the "check engine" light lit? Quote Share this post Link to post Share on other sites
bazzbazz 5 Report post Posted August 3, 2016 Kevin, Is the immobiliser light on perchance as you turn the key to MAR? Where in Oz are you? am in Brisbane and may be able to help out if you're not too far afield? Baz Quote Share this post Link to post Share on other sites
bazzbazz 5 Report post Posted August 3, 2016 Also as the Selespeed won't go past 2nd, if the VDC & ABS lights don't go out and stay on the car is most likely in "Limp home mode" as well. To be honest, till you get it hooked up to diagnostics it's a bit fruitless. Baz Quote Share this post Link to post Share on other sites