Jump to content
Sign in to follow this  
badgers_nadgers

Won't Start After Stereo Replacement

Recommended Posts

I broke my stereo the other day, so had to remove it. I had it repaired and put it back in and it's operating fine. However, now the car won't start. The vsr light is on and the immobiliser light won't go off and the engine management light is flickering very fast. I also had a warning about the water being too hot. However, this was after a cold night and I haven't used it in about a month.

 

Last time I had something similar, it was a fuse and it wouldn't turn over at all. This time, it turns over, but won't start. I've checked the fuses on the battery and they're all fine. However, the fuses in the dashboard seem to be obscured by all sorts of wires, so it's difficult to check.

 

Whoops, forgot to mention 156 GTA SW!

Edited by badgers_nadgers

Share this post


Link to post
Share on other sites

Well if you haven't been following the thread on Alfaowner, it turns out it was the ECU. Printed out the thread on there about what to fix and sent it for repair and has come back running perfectly.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...