AFLA 4 Report post Posted November 17, 2012 Hi all, My selespeed is acting funny again. Gear number flashes on 1st and sometimes 2nd as well. Jumps gears either to N or all the way up to 3rd and then settle on 2nd. Also can show 3rd but actually be in 1st. Fluid is topped up. Pressure 55 max and drop to 45 is fine. Rod is 28.4 Pump primes for ~10 seconds on door open. No errors. Done EOL. No joy. Is this Pump? Relay? Accumulator? Weak Battery? Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted November 19, 2012 Possibly gearbox internals, most likely the center casing has cracked inside . Quote Share this post Link to post Share on other sites
AFLA 4 Report post Posted November 30, 2012 OK So after getting p1742 errors and many jumps to neutral including stuck in neutral more than once, disconnected the selection sensor and without taking it (difficult to get at) off sprayed it and the connection liberally with contact spray. EOL and she is fine. Also the selection values seem more stable now. U really scared me with that Smaky... I hope this is not it... Quote Share this post Link to post Share on other sites
Smaky 73 Report post Posted November 30, 2012 I'll hope it's not too, freezing moisture in the connectors will do funny things, but I tink this issue is set to return even with what ou have done. Quote Share this post Link to post Share on other sites