Dopefish 0 Report post Posted October 14, 2015 Hi, i need some info for the stock cams of the 2.0 jts. Do somebody knows the timings and lift of these cams? I also need the diameter of the base circle and the maximum "recovery" of the lifter, because i saw some aftermarket cams and have a smaller base circle then the stock cams (to allow higher lift) and i would be sure that are not out of tolerance. Finally, the part code of the camlocks would be useful, since i have red that were changed after the recall of the intake camshaft of the firsts engines produced and would be sure to get the correct ones to check if the timing is correct. Thank you! Quote Share this post Link to post Share on other sites